X0 Defier Flashlight – Lighting │ Flashlights │ Headlamps │EDC Gears

Home » Products » X0 Defier Flashlight

X0 Defier Flashlight

Discountinued

LED: CREE XM-L2
Max output: 650 Lumens
Max runtime: 50 hours
Max beam distance: 245 meters
Max peak beam intensity: 15000 cd
Waterproof: IPX-8
Impact resistant: 1.5 Meter
Battery: 1×18650, 2xCR123A, 2xRCR123A/16340, 2×18650
Rated Range: 0V ~ 9V
Dimension:
Length 142.5mm/5.61inch
Head diameter 36mm/1.42inch
Body diameter 25.4mm/1.0inch

Weight: 130g /4.59oz(exclude battery)
Accessories: Operator´s manual, Two Spare O-rings, Spare Tailcap Rubber Boot, 550 paracode lanyard
Optional accessories: Holster, 18650 Extended tube, Filter&Diffuser, Remote switch

Features
1 .Super bright & lastest CREE XML-2 LED, High-Performance, High-Efficiency and energy conservation.
2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance.
3 .Toughened ultra-clear glass lens with 99% luminousness anti-reflective coating
4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization
5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity.
6 .Tactical switch with momentary-on function.
7 .Two output levels and Strobe mode, suitable for different environment.
8 .Wide input range provides more choices of batteries.
9 .Digitally regulated output-maintains constant brightness.
10 .Reverse polarity protection, to protect from improper battery installation.
11 .Engineered anti-slip knurling for a tightly firm grip.
12 .Dual recoil absoring springs, better impact resistance.
13 .Removable stainless steel ring.
14 .Tail hang hole design for lanyard use, to prevent accidental dropping.

Operation
1. Battery installation: Twist the tail to loosen and remove the tail,then insert the battery with the positive end toward the head.
2. Flashlight turning on/off:
For momentary light, gently press (no click) the tailcap push button switch
For constant light, fully press (click) the tailcap push button switch.
3. Output selecting Brightness level:

Screw the flashlight head:

Press the tail switch to Hight mode.

Unscrew the flashlight head:

Press the tail switch to Strobe mode.

Screw or Unscrew the flashlight head to transferring mode,circulate as High-Strobe-Low.